A floor screeding job in Leeds runs in a clear order. First we visit and check the slab against the finish going on top. Then you get a written price. Then the floor is prepared, the screed is laid level, and it is left to cure before tiles, heating or resin go down.
The Short Version
- What screed does for tiling, underfloor heating and resin floors
- Which situations in Leeds homes call for a new screed
- Why one firm handling floor and finishes keeps the job simple
- What laying day and curing time are like to live with
Invicta is a plastering, rendering and construction finishes business covering Leeds and the towns within twenty miles of it. For end-of-lease work, see our dilapidations contractor in Leeds page, and a person reads every request.
Ask Invicta for a quote on floor screeding in Leeds through the form and we will arrange a visit.
What Floor Screeding Involves
A bare concrete slab is rarely flat. Run a long straight edge across it and you find dips, humps and a fall nobody planned. Screed is the layer that fixes that. It is laid over the slab, or over insulation, and brought to a true level so the finish on top can sit properly.
We lay two kinds. Traditional screed is a sand and cement mix, spread by hand, tamped down and floated to level. Liquid screed is poured, flows out and finds its own level, then gets worked over the surface. Both are laid level for tiling, underfloor heating and resin floors, and the choice depends on what is going on top and what is underneath.
Underfloor heating changes the job. The pipes or cables need covering evenly, so the depth and the flatness matter more than usual. Resin floors are the least forgiving of all: any ridge in the base shows through the finish. Level first, finish second.
Get the base right and everything after it is easier.
Request your free floor screeding quote from Invicta in Leeds through the form, and we will reply to arrange a visit to check your slab level.
When You Need Floor Screeding in Leeds
Look at the floor before the tiles go down. Older Leeds terraces and semis often have worn, patched or uneven solid floors, and a new kitchen or bathroom floor will not forgive them. Tile adhesive can only take up so much, and a bad base shows in the lippage between tiles.
The usual triggers are easy to spot:
- An extension or conversion where the new slab has to meet the old floor height.
- Underfloor heating going in, with pipes that need burying under a flat, even layer.
- A resin or polished finish that needs a smooth, sound base.
- A worn or broken floor that has to be levelled before new coverings.
Extensions often come with other finishing work. If a conservatory is being upgraded, the same visit can cover the floor, and our work on conservatory roofs in Leeds sits alongside it for the boarding, insulation and plaster above. We cover Leeds and the towns within about 20 miles of it, so the job does not have to be in the city centre.
Searching for floor screeding near you in Leeds? Send your details through the form and a person reads the request and replies to arrange a visit.
Choosing Who Carries Out Floor Screeding
Screed is mixed, laid and left to cure, and it is hard to correct once it has gone off. That is why the person who lays it matters more than the product in the bag. You want one firm that sees the job from the first visit through to a floor ready for its finish.
That is how we run our floor screeding. We visit, look at the slab and the finish planned for it, and give you a written price before any work starts. The same firm lays the screed and handles the plastering and finishing around it, so the floor, walls and ceilings are not handed between different people who each assume someone else dealt with the edges.
Invicta is a plastering, rendering and construction finishes business, and screeding sits naturally next to that. Skirting lines, door thresholds and wall finishes all depend on the floor height being settled first.
One firm, one plan, one floor.
Request your free floor screeding quote from Invicta in Leeds through the form, and we will reply to arrange a visit to check your slab level.
How Floor Screeding Is Carried Out
The room tells you the order. Before a bag is opened, the floor is swept and checked, levels are taken, and anything that would let screed escape or crack is dealt with. Doorways, pipe runs and edges get attention first. Then the mix goes down.
For a traditional screed, the mix is placed in bays, screeded off to level and floated smooth. For liquid screed, it is pumped or poured, spread and then worked over so it settles flat. Either way, the work is staged: preparation, laying, then a curing period when the floor is left alone.
What is living with it like? It is a contained job. Materials come in through one route, the work stays in the rooms being screeded, and the rest of the house carries on. Dust is modest, because screed is wet work, not sanding. There is mixing and pumping noise on laying day, and then the floor goes quiet while it cures. You lose the room for that curing time, and we tell you what to expect before we start rather than leaving you to guess.
When a heat pump is part of the plan, the screed often has to be in before the system is finished. Whether you need a floor screeding in Leeds or air source heat pumps in Leeds, we cover the whole area, and planning the floor with the heating means the pipework and the level agree. Where Building Regulations apply to the floor build-up, we work to them.
Send your details through the quote form and we will arrange a visit.
Request your free floor screeding quote from Invicta in Leeds through the form, and we will reply to arrange a visit to check your slab level.



